Cart
It appears that your cart is currently empty
The Viper Gravity-Fed S-Series Anchor Winch was developed by Bell Marine after three years of research and two years of field testing.
It has now proven itself to be a serious contender in the high performance anchoring arena. The all-new all-stainless steel Gravity Feed was designed without any additional electronics, wiring or solenoids that can be the downfall in harsh boating environments.
The new drop speed will ensure your anchor hits the bottom exactly where you want it, when you want it.
At the touch of a switch, the Viper Gravity Feed winch controls the drop speed to ensure no over-spooling (can be set to match the size of your anchor), while giving you ultimate speed.
If you are anchoring in deep water and/or require high performance anchoring, the new Gravity Feed winch is the one for you – its quiet and efficient operation also conserves your battery and runs at up to four times faster than some drum winches using our mechanical patented design.
Please note: 1m of 3B&S cables is already attached to the motor and leak tested, so there is no need to remove end caps that are not sealed properly.
Features:
- 1000W submersible stainless steel electric motor with IP68 certification
- 28mm solid stainless steel shaft with 3 support bearings
- 8mm marine grade 316-grade stainless steel plate, hand polished to a mirror finish
- 316-grade stainless steel marine worm drive gear box
- 360 Degree motor rotation with 16 different positions
- Max fall rate: 138m per minute
- Max retrieval rate: 45m per minute
- Suit vessel length: 5.7m +
- Weight: 23 kgs (winch only)
- Well clearance required: 435mm (W) x 365mm (D) x 266mm (H)
Kit Bundle includes:
- 1x Viper S Series Gravity Feed 1000 electric drum anchor winch
- Choice of rope kits:
- 90m x 6mm Double Braid Premium
- 175m x 5mm Double Braid Premium
- 8m x 6mm Galvanised short link anchor chain
- Stainless steel worm drive marine gearbox
- Viper Pro Series anchor swivel - small
- Viper deluxe anchor roller - small
- 200 Amp reversing solenoid
- Elite Series stainless steel up/down switches
- 100 Amp flush-mount circuit breaker with rubber seal
- All necessary installation hardware
PACKAGING:
WINCH BOX: 46 X 45 X 35 CM 23KG
ROPE KIT: 27 X 27 X 25 CM 9KG
| JPW SKU | Rope | Shock Cord | Chain |
|---|---|---|---|
| JPW12853 | 90m x 6mm Double Braid Premium |
- none - | 8m x 6mm Galvanised Short Link |
Bulky Item Freight charges will apply, Click and Collect from our Mandurah office is Free
DELIVERY
Please refer to the table below for an estimate of delivery times to your area. Please note we do not ship to PO Boxes.
|
Delivery Location** |
Estimated Delivery Times* |
|
Melbourne, Sydney, Adelaide |
2-7 business days after dispatch |
|
Brisbane, Canberra, Geelong, Wollongong, Newcastle |
2-7 business days after dispatch |
|
Perth, Hobart, Darwin |
2-7 business days after dispatch |
|
Non-Metro - VIC, NSW, SA |
3-7 business days after dispatch |
|
Non-Metro - WA, TAS, QLD |
4-10 business days after dispatch |
|
Far North WA, Far North QLD and NT |
7-14 business days after dispatch |
*The above delivery times are estimates provided by our couriers. Actual delivery times may vary, and delays can occur during the peak Christmas Season or as a result of other factors outside of the courier's control.
**We do not ship to any PO Boxes or Parcel collection points. Orders must be signed for. Your order will be canceled if it goes to a PO Box.
Note: if your nearest warehouse is out of stock, your goods will need to ship from the next available warehouse. If this occurs, please allow an extra day or 2 in addition to the estimated times in the table above.
Shipping is calculated at checkout but orders over $399 are free, excluding fridges, solar panels and other large items were freight is not available
We ship Australia wide, however we do not ship International.