Cart
It appears that your cart is currently empty
The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT
controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10%
compared to slower MPPT controllers.
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output
will disconnect the load when the battery has been discharged to a pre-set voltage.
Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life.
The load output is short circuit proof.
Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote
control connected to the load output. A special interface cable may be needed, please see the manual.
Battery Life: intelligent battery management
When a solar charge controller is not able to recharge the battery to its full capacity within one day, the
result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of
discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within
weeks or months.
The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly
increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is
sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level
will be modulated so that a nearly 100% recharge is achieved about once every week.
Programmable battery charge algorithm
See the software section on our website for details
Day/night timing and light dimming option
See the software section on our website for details
Programming, real-time data and history display options
- Color Control GX or other GX devices: see the Venus documents on our website.
- A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed.
DELIVERY
Please refer to the table below for an estimate of delivery times to your area. Please note we do not ship to PO Boxes.
|
Delivery Location** |
Estimated Delivery Times* |
|
Melbourne, Sydney, Adelaide |
2-7 business days after dispatch |
|
Brisbane, Canberra, Geelong, Wollongong, Newcastle |
2-7 business days after dispatch |
|
Perth, Hobart, Darwin |
2-7 business days after dispatch |
|
Non-Metro - VIC, NSW, SA |
3-7 business days after dispatch |
|
Non-Metro - WA, TAS, QLD |
4-10 business days after dispatch |
|
Far North WA, Far North QLD and NT |
7-14 business days after dispatch |
*The above delivery times are estimates provided by our couriers. Actual delivery times may vary, and delays can occur during the peak Christmas Season or as a result of other factors outside of the courier's control.
**We do not ship to any PO Boxes or Parcel collection points. Orders must be signed for. Your order will be canceled if it goes to a PO Box.
Note: if your nearest warehouse is out of stock, your goods will need to ship from the next available warehouse. If this occurs, please allow an extra day or 2 in addition to the estimated times in the table above.
Shipping is calculated at checkout but orders over $399 are free, excluding fridges, solar panels and other large items were freight is not available
We ship Australia wide, however we do not ship International.