Cart
It appears that your cart is currently empty
HCP 2 MX marine amplifier feature a compact design ready to face the open water environment, providing tons of clean power. The HCP M heat sink has been crafted from extruded aluminium, a material unmatched for lightness, robustness and heat dissipation. To keep size to a minimum, the power transistors are placed between the PCB and the top side of the heat sink where heat is gathered. Built up heat is then directed to the special dissipation “wings” along the side of the amplifier. Both Pre-In and Speaker-In inputs feature a special balanced circuitry, ensuring high rejection against electro-magnetic interferences for noise-free results. The HCP M amplifiers crossover section ensure extreme flexibility: fully adjustable Lo-pass, Hi-pass filters with 12 dB/Oct. and 24 dB/Oct. slopes according to the amplifier model; Bass Boost is also available to enhance low frequencies. More specifically HCP 2 MX features Hi-Pass pre-amplified outputs, providing the ability to create a Band-Pass on the front woofer.
General Specs
| Channels | 2 - 1 |
| POWER SUPPLY | |
| Power supply voltage / fuse: | 11 ÷ 15 VDC / 2 x 20 A |
| ldling current (power ON/OFF): | 0.6 A / 0.4 mA |
| Consumption@ 1Ω, 14.4 VDC (Max Musical Power): | 20 A |
| Remote In: | 7 ÷ 15 VDC - 1 mA |
| ART: | Automatic Remote Turn-OniOff with Speaker-ln |
| AMPLIFIER STAGE | |
| Distorsion - TliD (100Hz @ 4Ω): | 0.03% |
| Bandwidth: | 10 ÷ 65 kHz |
| S/N Ratlo (A welghted @ 1 V): | 105 dB |
| Damping factor (100Hz @ 4Ω) | 300 |
| Pre-ln sensitivity: | 0.2 ÷ 5 VRMS |
| Speaker-ln sensitivity: | 0.8 ÷ 20 VRMS |
| Load impedance (MIN) @2Ch: @1Ch: |
2 Ω 4 Ω |
| Max size (mm/in): | 315 x 190 x 50 / 12.40 x 7.48 x 1.97 |
| Weight (kg/lb): | 2.57 / 5.66 |
| Adjustable Crossovers | yes |
INPUTS / FILTERS
| lnputs: | PRE IN/ SPEAKER IN |
| Pre-out FULL | Yes |
| Hi-Pass: | 50 ÷ 3200 Hz @ 12 dB/Oct |
| Lo-Pass | 50 ÷ 3200 Hz @ 12 dB/Oct |
| Filters FULL | Yes |
| Hi-Pass: | 50 ÷ 3200 Hz @ 12 dB/Oct |
| Lo-Pass | 50 ÷ 3200 Hz @ 12 dB/Oct |
| Mono (On/Off) | Yes |
| Boost 50 Hz (select) | (0 / 3 / 6) dB |
Output Power
| OUTPUT POWER (RMS) @ 28.8 VDC, THD 1% | |
| 2Ch | 100 W x 2 (4Ω) |
| 2Ch | 160 W x 2 (2Ω) |
| 1Ch | 320 W x 1 (4Ω) |
| OUTPUT POWER (RMS) @ 28.8 VDC, THD 10% | |
| 2Ch | 120 W x 2 (4Ω) |
| 2Ch | 200 W x 2 (2Ω) |
| 1Ch | 400 W x 1 (4Ω) |
| CEA 2006-A RATINGS | |
| RMS Power (4 Ω, ≤ 1 % THD+N,14.4 V): | 100 W x 2 Ch |
| S/N Ratio (ref. 1 W output) | 83 dBA |
| Total Power RMS | 800 W |
Physical Specs
| mm | in | |
| A | 315 | 12.40 |
| B | 291 | 11.45 |
| C | 190 | 7.48 |
| D | 166 | 6.53 |
| E | 50 | 1.97 |
DELIVERY
Please refer to the table below for an estimate of delivery times to your area. Please note we do not ship to PO Boxes.
|
Delivery Location** |
Estimated Delivery Times* |
|
Melbourne, Sydney, Adelaide |
2-7 business days after dispatch |
|
Brisbane, Canberra, Geelong, Wollongong, Newcastle |
2-7 business days after dispatch |
|
Perth, Hobart, Darwin |
2-7 business days after dispatch |
|
Non-Metro - VIC, NSW, SA |
3-7 business days after dispatch |
|
Non-Metro - WA, TAS, QLD |
4-10 business days after dispatch |
|
Far North WA, Far North QLD and NT |
7-14 business days after dispatch |
*The above delivery times are estimates provided by our couriers. Actual delivery times may vary, and delays can occur during the peak Christmas Season or as a result of other factors outside of the courier's control.
**We do not ship to any PO Boxes or Parcel collection points. Orders must be signed for. Your order will be canceled if it goes to a PO Box.
Note: if your nearest warehouse is out of stock, your goods will need to ship from the next available warehouse. If this occurs, please allow an extra day or 2 in addition to the estimated times in the table above.
Shipping is calculated at checkout but orders over $399 are free, excluding fridges, solar panels and other large items were freight is not available
We ship Australia wide, however we do not ship International.