Cart
It appears that your cart is currently empty
1 kW, flush-mount, Tilted Element™ transducer is perfect for fast, trailered vessels that cannot accommodate a high-performance fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (1/4") outside your hull and can sit on trailer rollers and bunks. The ceramic array is tilted inside the housing, providing the perfect vertical beam with maximum energy on what is directly below the boat.
Available in three Tilted Element models:
- Fixed 20° tilted version for 16° to 24° hull deadrise
- Fixed 12° tilted version for 8° to 15° hull deadrise
- Fixed 0° tilted version for 0° to 7° hull deadrise
Features
- Depth and fast-response water-temperature sensor
- 1 kW power for performance to 500 m (1,640'):
- 50 kHz with a wide 22° beam
- 200 kHz with a 6° beam
- Interfaces to any 600 W or 1 kW echosounder
- Engineered for centre-console and trailered boats
- Low-profile protrusion is less than 6.35 mm (0.25") outside your hull
- No effect on boat's running performance
- Bronze housing
- * RezBoost™ Enhanced, BDS & ACCU-Fish Compatible
DELIVERY
Please refer to the table below for an estimate of delivery times to your area. Please note we do not ship to PO Boxes.
|
Delivery Location** |
Estimated Delivery Times* |
|
Melbourne, Sydney, Adelaide |
2-7 business days after dispatch |
|
Brisbane, Canberra, Geelong, Wollongong, Newcastle |
2-7 business days after dispatch |
|
Perth, Hobart, Darwin |
2-7 business days after dispatch |
|
Non-Metro - VIC, NSW, SA |
3-7 business days after dispatch |
|
Non-Metro - WA, TAS, QLD |
4-10 business days after dispatch |
|
Far North WA, Far North QLD and NT |
7-14 business days after dispatch |
*The above delivery times are estimates provided by our couriers. Actual delivery times may vary, and delays can occur during the peak Christmas Season or as a result of other factors outside of the courier's control.
**We do not ship to any PO Boxes or Parcel collection points. Orders must be signed for. Your order will be canceled if it goes to a PO Box.
Note: if your nearest warehouse is out of stock, your goods will need to ship from the next available warehouse. If this occurs, please allow an extra day or 2 in addition to the estimated times in the table above.
Shipping is calculated at checkout but orders over $399 are free, excluding fridges, solar panels and other large items were freight is not available
We ship Australia wide, however we do not ship International.
Related product
Furuno
CM265LH Chirp-ready - 12Pin Furu...
Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! CHIRP transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times great...
$2,389.00
Airmar
CM599LH Chirp-ready
Airmar
CM599LH Chirp-ready
Having the right tool for the job makes the job easier and gives better results. The right tool for covering deep-water haunts of swordfish, tuna, and other species is a 2 to 3 kW, low and high-fre...
$7,800.00
Furuno
P66 Furuno 525T-PWD Plastic 600W...
Airmar P66 Housing Style Transducer Standard Features 600 Watts 50/200 kHz 45/12 degree Beam Angles Plastic Transom Mount with Temperature 30 Foot Cable with 10-Pin Connector This unit uses the A...
$240.00
Furuno
SS175M S/steel 1kW 85-135kHZ MED...
Medium frequency delivers the right combination of coverage under the boat, extended depth range, and the ability to produce clean and accurate target and structure returns in mid to deeper water. ...
$2,080.00
Furuno
SS175L S/Steel 1KW 40-60kHz LOW ...
Airmar’s low-profile, Chirp-ready, transducer models are the perfect addition to smaller boats such as center consoles. The low-frequency band is the deep-water performer delivering excellent cover...
$2,450.00
Furuno
SS175H-W S/steel 1KW 150-250kHz ...
Get more coverage under your boat with Airmar’s unique wide-beam, high-frequency, Chirp-ready transducer. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam ...
$2,450.00